Laser cutting technology uses laser beam to the plate surface, the energy released to the stainless steel melting and evaporation. General use of carbon dioxide laser beam, the working power of 500 to 2500 watts. The power level than the required number of home heating power consumption is lower, however, through the lens and mirrors, the laser beam gathered in a small area. High concentration of energy for rapid local heating to make stainless steel evaporator. In addition, the energy of the laser cutting machine is very concentrated, so only a small amount of heat spread to other parts of the steel, the deformation caused by little or no deformation. Laser cutting machine can cut complex shapes very accurately the stock, the stock no longer cut for further processing. Laser cutter machine can cut stainless steel 4mm below, adding oxygen in the laser beam can be cut 8 ~ 10mm thick stainless steel, but the added oxygen in the cut surface after cutting The formation of a thin oxide film. The maximum cutting thickness can be increased to 16mm, but the cutting part of the larger size of the error. Laser cutting machine price is quite expensive, about 150 dollars. However, follow-up process due to lower processing costs, so in large-scale production equipment used in this Is feasible. Since there is no tooling cost, so the laser cutting equipment is also applicable to the original production of small quantities of various sizes can not be processed parts. Currently, laser cut Computerized cutting equipment, digital control technology commonly used (CNC) device used in the device, you can use the telephone cord from the computer-aided design (CAD) workstation to accept Cutting data.