the process of the use,Fiber Laser Cutting Machine is to ensure the quality of the incision, cutting tip to cut the workpiece surface height must remain basically the same.As the speed of laser cutting machine,Fast as the laser cutting machine speed,The operator use your eyes to see,Hand-tune the operation is not good,The speed of response is certainly unattainable.Especially when cutting sheet metal, or the surface texture, flatness, or cutting in case of limited processing environment,It is important to keep cutting the high degree of stability.
when Metal laser cutting machine is used,The cutting head will walk according to the cutting path set,However, the case of different materials, different thicknesses, different cutting methods,Laser cutting head height is the need to adjust the control, the distance between the tip and cut the workpiece surface to determine the incision quality and cutting speed of one of the main factors.in addition to Metal laser cutting machine selects the appropriate cutting nozzle type and pressure parameters According to the cutting situation,Need to cut the material thickness on the cutting head and steel plate height increase or decrease,
because it has different thickness of steel plate and uses different parameters. Cutting nozzle should be adjusted to the appropriate height.
in order to make up manually adjust the cutting height control instability,Metal laser cutting machine is equipped with imported servo capacitance increase,Whether it is cutting more than thick plates have capacitance to increase the cutting servo head,A high degree can be consistent.
The principle of the capacitance increase is:Capacitive sensing ring to form the capacitance between two plates to be cut steel plate,it is connected with Capacitor size and the distance between the two.