Basic knowledge of engraving machine tools
Sharp knife (carbide) double-edged spiral cutter (Carbide)
Main functions: two D flat carving, II-D cutting, and 3D trajectory angle.
The carving Applicable Material: color plates (ABS), acrylic can be used for copper, iron, aluminum, plastic and other types of metal and nonmetal materials.
Note: engraving metal should add the coolant should be used in order to speed up the engraving speed wide tip.
For the market to meet the requirements of the fine engraving users launch three Ling knife, four Ling knife
The main functions: II-D cutting, two D flat carving.
The sculpture applicable Material: acrylic, PVC.
Black metal characteristics: vertical cutting acrylic with good heat resistance and abrasion resistance, spiral blade cut again to ensure the smoothness of the object surface, excellent performance when cutting thicker plate, it can also used to the processing of ferrous metals such as iron, steel, and so on.
3D chisel (carbide) single slot spiral cutter (Carbide)
Main functions: 3D trajectory angle, chamfer.
The sculpture applicable Material: Acrylic, PVC, and can also be used MDF, medium hardness timber.
Note: regardless of being carved, or anti-carving, keep the carving plane formation, and select the appropriate blade width 3D trajectory angle carving is very important, it is recommended that small-format engraving machine blade width should not exceed 22MM, large format engraving machine appropriate blade width of the tool can speed up the carving speed.
The main functions: II-D cutting Applicable materials: acrylic, PVC and MDF.
Features: combination of strong cutting force and chip-invigorating the advantages of single-slot design, spiral blade cutting to ensure that cutting the body surface smooth, a large number of processing PVC, MDF has a good working efficiency.
The double-edged spiral cutter (Carbide) single slot straight edge cutting tools (carbide)
Main performance: D cutting, II-D sculpture.
The carving Applicable Material: natural wood, synthetic wood, plastic.
Features: special wood cutting tools, such double-edged tool used for processing wood and synthetic wood debris to exclude the cutter body is strong, durable, good machining results (no edges on the surface).
Main performance: II-D cutting
Applicable material: softwood, medium density and medium hardness wood can also be used for the elastic anti-friction plastic.
Characteristics: a combination of the slotted design and single-edged geometric design for fast cutting when the debris is cleared automatically.
Ball milling cutter (Carbide) double-edged straight flute cutter (Carbide)
Main performance: 3D sculpture, II-D cutting.
The carving applicable Material: acrylic, black metal.
Note: The wide choice of ball milling the blade depends on the accuracy and size of the surface sculpture is generally divided into secondary sculpture, crude carving tool can be used to edge diameter of the larger, carved should be selected edge of smaller diameter.
Main performance: II-D plane carving, II-D cutting.
Applicable Material: medium density fiber D board, hardwood, acrylic.
Features: MDF material designed for CNC engraving and design, combined with a special carbide cutter body and the blade geometry of the hard, durable, non-ferrous metals roughing with high work efficiency.
Clear the end of the tool (carbide) single-edge column cutter (Carbide)
Main properties: the end of the milling
Material: Acrylic, PVC, MDF apply.
Note: must maintain a carving plane in the formation of any engraving machine at work, especially in the II-D sculpture and three-D carved sculpture who is often in order to save rather sloppy, the results carved products are mostly unqualified, or the need to manually modified.
Main performance: II-D cutting
Applicable Material: color plates, plastic plates, can be used for the following 3MM thick acrylic.
Note: cut color plates, such as no special requirements can be cut, and usually finished dagger, but a sharp knife cut easily passivated, and then carving will flash. Single edge of the column design principles with the sharp knife of the knife, but it is a vertical cut with a slope, especially for the design of the mosaic.
The three-blade spiral cutter (Carbide) lace knife series (carbide)
Main performance: cutting, carving
Applicable materials: acrylic, PVC
Main performance: chamfering, cutting
Applicable materials: acrylic, wood
Note: this section the tool most suitable for the chamfer of the MDF, should slow down when processing acrylic, engraving speed, recommend the use of more than 5MM thick layered sculpture features.
1/8 "(3.175MM) micro-Ling tooth cutter head 1/8" mini-drill (3.175MM)
Applicable materials: printed circuit board
Note: carbide the micro Ling tooth cutter, cutter diameter Φ0.8mm to Φ3.175mm, Shank Diameter 1/8 ", and according to customer requirements to produce long-groove cutter.
Its characteristics are as follows:
1, the use of ultra-fine grain cemented carbide material has good milling and cutting performance, ensure high work efficiency.
2, there is sufficient bending strength and wear resistance.
3, slot milling, the motherboard side surface clean, neat, no glitches.
4 Specifications 0.8-3.175MM
5, applies to: printed circuit board
The knife at home and abroad, CNC machine tools, drill bit diameter from Φ0.3mm Φ6.5mm, Shank Diameter 1/8 ", and can produce a series of bits according to customer requirements.
Its characteristics are as follows:
1, using ultra-fine grain cemented carbide materials, products, hard, good toughness, suitable for efficient production of the PCB industry conditions, to ensure good wear resistance and service life.
2, high dimensional accuracy, form and position errors, minimal drilling eccentric hole wall is smooth.
3, model specifications, and easy for users to select the desired product.
To undertake non-standard bit longer products.
The solid carbide anti-thread cutter carbide double-edged straight slot bovine knife
Tool Material: imports of ultra-fine grain cemented carbide material.
Tool performance: Cr12 materials slotted and go rough.
Characteristics: has a superior performance on the sophistication of the tool in the processing of Cr12 materials, in terms of durability, or processing. Its processing, low noise, smooth cutting.
Specifications: Ø3.175X1.5X5X40 Ø3.175X2.0X6X40
Tool Material: imports of ultra-fine grain cemented carbide material.
Tool Uses: used as a surface and the processing of the mixed body of the plane.
Features: the effect of processing in the processing surface and the plane of the joint.
Specifications: Shank Diameter 3.175MM blade diameter 3MM, Blade length 8MM, arc 0.5MM.
Double-edged straight groove chisel
Tool Material: imports of ultra-fine grain cemented carbide material.
The tool uses: high frequency mold and plastic drop mold slotted and materials to roughing. Can also be used to organic, hardwood, II-D carving the bottom of the flat, fast.
Use features: the knife strength, a sharp tool, excellent machining results and machining efficiency.
Tool Specifications: tool diameter 3.175mm, tool angle 0 ° -90 °, tip diameter 0.5
Tool Guide:
1.3D carving knife, high concentricity, sharp edge, do sophisticated 3D engraving process.
HDF, wood recommended edge tooth cutter.
Plywood, plywood processing, recommended to use the double-edged straight slot cutters.
Precision small relief processing, it is recommended to use a round bottom graver.
MDF cutting processing (advertising mold) is recommended to use double-edged BTA spiral cutter, it has the flutes of the two high-capacity, double-edged design, with both good chip removal capabilities, but also reached good tool balance in HDF processing, not black, do not cap the smoke, long life characteristics.
6 aluminum cutting, recommended to use a single blade for aluminum cutter. Sticking to the knife, processing speed, high efficiency.
On the following burr-free cutting, it is recommended to use a single blade, double-edged upper and lower shear cutter.
Metal sculpture processing, recommended to use a single blade, double-edged straight groove flat dagger.
. Acrylic cutting, it is recommended to use a single edge spiral cutter is characterized by processing a smoke-free and tasteless, fast, high efficiency, non-stick crumbs, real environmental protection, and its special manufacturing process to ensure that processing acrylic population explosion fine knife pattern (or even knife pattern), flat and smooth surface. Machined surface required to achieve a matte effect, recommended a double-edged three blade spiral cutter.
10 The acrylic mirror engraving process is recommended to use the diamond graver.
. Rough particleboard recommended multi stripes cutter.
Metal mold cutter, recommended to use the tungsten steel cutter, surface plated purple and hard titanium.
13 cork, MDF, native wood, PVC, acrylic large deep relief processing is recommended to use single-blade screw ball end mill.
14. The effect of the use of the next cutter, on the surface of the processed products no glitches, processing will not be a rocker